A well installation is an excellent investment since it enables your family to enjoy a fresh, clean source of water for years without relying on a municipal utility company. However, when considering this installation, many homeowners are confused as to where to place the well on their properties. Below, learn a few important do’s and don’ts for choosing a new well location.

Do: 

Know your property boundaries. 

Learn the exact boundaries of your home by referring to the information that came with your home when you purchased it. If you can’t find this information, consider having a land survey performed. Wells can’t be placed closer than five feet to a property line and 20 feet to a road, so learning where your land starts and stops is crucial. 

Research the rules for your area. 

Before you dig a private well, you should always investigate the permit requirements in your area. Most areas require residents to get a permit from the city, and you may also need to gain permission from your local home owner’s association if you have one. 

Don’t: 

Choose an area that requires drilling through bedrock.  

If you have a large property, there may be different geological challenges based on the location you choose. Don’t select a well installation location that requires drilling through bedrock, as this process is difficult and time-consuming. This could drive up the cost and drag out the timeline of your project. Refer to geological survey information for your area to learn more about proper well placement. 

Place near contamination sources. 

Well installations need to be placed a safe distance from potential sources of contamination, such as septic tanks and cesspools. Wells should be placed at least 50 feet from a septic tank, 200 feet from a landfill or cesspool, and ten feet from an iron sewer. After you install a water well, you should never dispose of potential sources of contamination, such as paint, on your property. 

If you need a water well but you are unsure of where to start, turn to Morgan Well & Pump Inc. in Kannapolis, NC. Since their inception in 1948, this trusted team has been helping with well installation, inspections, and maintenance to help people enjoy cleaner and healthier drinking water. To find out more about their services, visit their website, or give their office a call at (704) 933-0479.