A properly working pressure tank ensures your water well services provide quality and consistent performance for all your household needs. This device eases the strain on the submersible pump so that it doesn’t work harder than needed. Your home will also continue to have reliable water flow with the appropriate pressure levels. The following guide looks at how to check a well’s pressure tank and spot two common problems. 

What to Know About Low Water Pressure & Waterlogging

The pressure tank contains pressurized water and air. The two are separated by a bladder that rises and falls based on the water pressure. If the bladder isn’t doing its job, you may encounter issues with low water pressure while taking a shower or washing dishes. 

Another issue that can occur with a defective well pressure tank is waterlogging. This occurs if the bladder has too much water to operate normally. Corrosion may form inside the tank and weaken the device. Excessive water can also cause the submersible pump to wear out faster. If this is an issue in your home, you may notice an unusual water taste and smell. 

How to Check the Pressure Tank

Regular inspections of the pressure tank can help identify minor issues before they become costly headaches that require the attention of a water well services professional. If low pressure or waterlogging is occurring, a quick test may help detect any stopgaps. 

First, locate the pressure tank gauge, which is typically found on the tank’s bottom. Most models have a PSI meter that ranges between five and 10 PSI. Ask someone in the household to stand near a faucet while you stand near the pressure tank with a stopwatch or other timer.

Second, ask the person to turn on the faucet and let it run for a few minutes. During this time, you’ll watch the pressure gauge move to the low setting. Once it reaches this mark, start your timer and then stop it when it reaches the high setting mark. 

Finally, write down the number of seconds it took for the pressure gauge to reach the high setting mark. If the time span was less than a minute, there might be a problem with the tank. Call a technician to diagnose the issue and make the necessary repairs. 

With over 50 years of experience, Gainous Well Drilling in Cairo, GA, provides superior installation, maintenance, and repair services in Thomas and Grady counties. The licensed and certified drilling contractor uses specialized detection equipment to test, identify, and repair low water pressure and waterlogging problems. Call (229) 377-7883 to schedule a pressure tank inspection. Visit the website to learn about the company’s water well service options.