Share:

Most people don’t pay much attention to their faucets until something goes wrong. That’s when the topic of faucets and the problems that commonly affect them becomes interesting. While you should always consult with a professional plumber when dealing with complex repairs, here’s a closer look at the most likely issues.

How to Deal With 4 Common Faucet Problems

1. Sputtering

Blocks in the faucet affect the flow of water. This is typically identified by a sputtering water stream, which usually indicates that the line is clogged with dirt or other debris. Flushing the line is recommended in this case, but removing the aerator and turning the faucet on at full blast can sometimes get debris to shake loose. 

2. Rust

plumberRust on the outside of your faucet is not just an aesthetic issue. It may also signal that there’s rust on the interior as well, which can cause tap water to have an unpleasant taste. When rust forms, your best bet is to completely replace the faucet with a new model. 

3. Clanking Noises

Any new noises coming from your faucet when it’s turned on should be cause for alarm. Clanking in particular usually means that some component of your faucet, such as the hardware or aerator, has broken down.

It’s possible to take apart your faucet to look for the broken part; just be sure that you can put it back together again. If not, call a plumber. 

4. Dripping

Washers in the faucet act as seals that prevent water from leaking out. When they wear down over time, a dripping faucet isn’t far behind. Replacing worn washers is key in preventing drips, which are not only annoying but can also increase your water bill.

 

When faucet issues or other plumbing problems arise, you need a plumber you can trust. Dependable Plumbing has served residents of Ellijay, GA, for more than 27 years, building a reputation for being trustworthy and prompt. They’re available 24/7 to deal with plumbing issues large and small throughout North Georgia, from faucet drips to burst pipes. They also provide free estimates, so you know exactly how much you’re paying before work gets started. Call (706) 698-5000 to schedule service or visit them online for more info. They also provide references upon request. 

tracking