Designed for deep water wells, submersible pumps use a motor to push water up toward the surface rather than pull it in the way that a centrifugal device does. This functionality reduces wear and allows submersible models to last much longer than others. While this equipment can provide a reliable service life for up to 20 years, getting them to last this long requires minimal ongoing care. To help you protect your system, here are a few important strategies to keep your deep well pump in good shape.  

4 Ways to Help Your Submersible Pump Last Longer

1. Schedule Annual Inspections

Even if your tap seems to be running fine, it’s critical to have your submersible pump inspected by a professional water well service about once a year. During the inspection, the specialist will evaluate the pump’s mechanical abilities as well as the cleanliness of the well structure. Several tests, including water quality and flow rate, will also be performed to ensure the pump is working as it should.

Your contractor may notice that some pump parts—such as hoses, seals, impellers, and bearings—are worn. While they may still technically be functional, it’s a good idea to have these parts replaced before turning the system back on. 

2. Prepare for Lower Water Levels

Make sure your submersible pump is set to turn off if water levels drop below a certain point. Without this precaution, the pump may be exposed to air, causing the system to overheat and fail.

3. Check Pressure Tank

You should periodically make sure the pressure tank’s switch is functional and creating the desired levels of water pressure. If it’s not working properly, the tank may have trouble holding water. In these cases, the pump may cycle on and off to replenish the tank, using energy inefficiently and leading to premature wear.

4. Address Problems Right Away

If you’ve noticed a change in your water quality, experienced a drop in pressure, or hear strange sounds coming from the pump, hire a contractor to identify and fix the issue right away. These behaviors may signal that the pump isn’t working correctly and may cause additional problems if it isn’t repaired in a timely fashion.

Whether you’re having submersible pump problems or need a new water well installed, Gainous Well Drilling has the resources to help. Serving the Grady County community, this drilling contractor will perform in-depth well inspections and cleanings to make sure the pump, tank, and other system components are fully functional. They also provide reliable well pump repairs or replacement to keep your water moving strong. Visit this provider online to learn more about the water well services they offer in Cairo, GA, or call (229) 377-7883 to speak with a friendly expert.