Garage doors are a part of everyday life you don’t pay much attention to until there’s a problem. When an issue does arise, it can be frustrating to not know what’s going on. Luckily, many of these problems are easy to identify with a bit of knowledge, and a few can even be fixed with a few tools and a bit of know-how. Here’s what you’re most likely to encounter.

3 Frequently Seen Garage Door Problems

1. Misaligned Track

One of the most important parts of your system is the track. Your door is guided along this metal track, so it needs to be properly aligned if it’s to close smoothly and completely each time.

Gaps between the rollers and the rail, bending or warping, or unusual rubbing or scraping noises can all be indicators of an issue with the track. A few factors can cause this problem, from the weight of the door to age.

You can attempt to resolve this issue by unscrewing the affected area of the track and gently tapping it back into position with a rubber mallet, but only take a DIY approach if the misalignment seems minor and you’re comfortable with your ability—especially if your door is under warranty. Don’t be afraid to call for help if you don’t feel confident or the door won’t move at all.

2. Unresponsive Wall Switch

You rely on your wall switch to close your doors from inside constantly, so it’s important to address any issues with it as soon as they come up for security and safety reasons. For the most part, this is a fairly simple issue, the usual culprit being a problem with the power supply.

Wall switches are fairly simple devices, with most of them connected by two to four wires to terminals and from there to a power supply. First check your breaker box, and if you notice any switches flipped or fuses burned out, replace or switch them back as needed.

Otherwise, if there’s nothing visibly wrong like broken wires, the issue could be the power supply in the motor, which will need professional attention.

3. Sticky Doors

Your garage doors rely on just a couple of key components to open and close fully. The first is the track, and the second is the limit switch, which is a sensor that tells your door when to stop moving for safety purposes.

If the door is sticking, the issue could be the track, which may be hindered by rust, dirt, or some other obstruction. With a visual inspection, you should be able to find and clear anything like this fairly easily. If the limit switch is the problem, you may need to move it closer to the door, reset it manually, or replace it altogether.

 

For help with all your door and opener needs, turn to MAC Garage Door Company, Inc. of Lexington, NC. For nearly 20 years, MAC has been offering exceptional and rapid service to the residents of Davidson and Forsyth counties. Find out how they can help you by calling (336) 731-7849 for a repair quote over the phone or learn more about their services online.