Installing a fence with a gate is an effective way to boost your home’s privacy and security. Because the entrance sees a lot of movement, over time, it may begin to sag from stressed hinges or loose fasteners. If your gate is drooping, here are a few potential causes and how they can be addressed.
What to Do If Your Gate Is Sagging
1. Tighten the Hinges
If you have a wood gate, the looseness could be caused by the hinges that connect the door to the fence post. These types of gates are mounted using heavy-duty screws, but over time, their grip can loosen.
To address this problem, simply tighten the hardware using a screwdriver.
2. Check the Posts
If a wooden post rots due to moisture infiltration, the gate could lean to one side. This issue would require a post replacement with pressure-treated wood. The contractor will have to remove the old structure to install a new one.
However, if the post is metallic and in good condition, a contractor will simply reset its position by pulling it from the ground and replanting it with fresh concrete.
3. Square Up
This repair method is best for wood gates that pull downward and can’t close properly because of an altered shape. Squaring up the fitting helps it maintain the shape it needs to close and not droop.
A professional will use cables, brackets, and a turnbuckle to place the gate in a squared position. Once the fixtures are reattached, they’ll tighten the cables until the unit closes easily.
Keep your home secure by reaching out to the team at American Fence Company when your gate or fence needs attention. They offer decorative gate replacements, and perform fence repairs. For more than 30 years, this fully licensed company has been the go-to source for fencing solutions for residents throughout Rockland County, NY. They work with a wide variety of fencing materials, including wood, chain-link, aluminum, and vinyl. Learn more about what they do online or call (845) 219-5278 to schedule an appointment.