Part of putting your home on the market is scheduling home inspections. Whether you’re getting your property appraised before setting the price or are preparing for a final inspection before closing, you want your property to be in the best shape possible to encourage an efficient sale. While you may be focusing your efforts on other areas of your home, don’t forget about the garage. Below are a few areas to check to ensure you have time for garage door repair before the inspector arrives.

4 Ways to Get Your Garage Door Ready for a Home Inspection

1. Ensure the Manual Release Handle Works

 If the power is out or the electric opener mechanics are not working, homeowners will still need to be able to open and close the door. Start with the door closed, and pull the emergency release cord. The handle should be less than six feet above the floor to ensure it’s reachable. Continue pulling the door until you’re sure it opens fully, then gently release the door back down to the ground. After this test, pull the cord toward the door to re-engage the opener, and then use the remote to open and close the garage to ensure the components are reconnected.

2. Assess the Springs

Over time, the springs become rusted, corroded or bent, which interrupts the mechanism. Visually inspect the springs, and take note of damaged areas. Have a garage door repair technician replace the springs if they are showing visible signs of wear.

3. Keep the Rollers on Track 

Overhead tracks have rollers that move the door up and down. Over time, the rollers may become damaged, and they require replacement if they are bent and start jumping the tracks or are otherwise not working efficiently. Get new rollers if the current ones are prone to going off the tracks.

4. Check the Moisture Seal

Garage doors not only promote security and safety, but they must also keep moisture out. Have a repair specialist assess the bottom flap to ensure it is adequately depressed when the door shuts to prevent precipitation from flooding the building. Additionally, the door panels must meet

Part of putting your home on the market is scheduling home inspections. Whether you’re getting your property appraised before setting the sale price or are preparing for a final inspection before closing, you want your property to be in the best shape possible to encourage an efficient sale. While you may be focusing your efforts on other areas of your home, don’t forget about the garage. Below are a few areas to check to ensure you have time for garage door repair before the inspector arrives.

4 Ways to Get Your Garage Door Ready for a Home Inspection

1. Ensure the Manual Release Handle Works

 If the power is out or the electric opener mechanics are not working, homeowners will still need to be able to open and close the door. Start with the door closed, and pull the emergency release cord. The handle should be less than six feet above the floor to ensure it’s reachable. Continue pulling the door until you’re sure it opens fully, then gently release the door back down to the ground. After this test, pull the cord toward the door to re-engage the opener, and then use the remote to open and close the garage to ensure the components are reconnected.

2. Assess the Springs

Over time, the springs become rusted, corroded or bent, which interrupts the mechanism. Visually inspect the springs, and take note of damaged areas. Have a garage door repair technician replace the springs if they are showing visible signs of wear.

3. Keep the Rollers on Track 

Overhead tracks have rollers that move the door up and down. Over time, the rollers may become damaged, and they require replacement if they are bent and start jumping the tracks or are otherwise not working efficiently. Get new rollers if the current ones are prone to going off the tracks.

4. Check the Moisture Seal

The garage doors not only promote security and safety, but they must also keep moisture out. Have a repair specialist assess the bottom flap to ensure it is adequately depressed when the door shuts to prevent precipitation from flooding the building. Additionally, the door panels must meet, so rainwater won’t seep in.

 

Homeowners interested in getting garage door repairs before selling their property can contact Mid-State Door & Opener in Monroe County, WI, to schedule an appointment. The skilled team has more than 25 years of experience facilitating safe operation and security thanks to their garage door repair,  installation, and maintenance services. Call the Tomah-area company at (608) 372-9681 or visit the website for information on their inventory of top brands.