There’s nothing as refreshing as a nice, hot shower. But, when the water pressure is too low, it can be difficult to get completely clean. If your shower water pressure is inexplicably lower than usual, a plumbing issue may be to blame. Here are some possible causes.

4 Plumbing Issues That Can Cause Low Water Pressure

1. Mineral Buildup

Over time, minerals in the water can accumulate on the pipes, resulting in blockages. This is often a problem in homes with hard water, which has a high mineral concentration. As the clog worsens, it can become more difficult for water to travel through the pipes and reach the shower, resulting in lower pressure. A professional can use a particular solution to clear the pipes.

2. Corrosion

In addition to accumulating minerals from the water, pipes will likely corrode as they age. If the pipes leading to the shower are rusty, they’ll likely get blocked with particle buildup. A plumber can flush out minerals, but extensive corrosion typically requires repiping.

3. Leaks

The thought of leaky pipes may evoke images of puddles of water on the floor. But, not all leaks are so noticeable. Some are imperceptible without an in-depth investigation. Low water pressure can indicate a leak within the plumbing, which should be addressed immediately to avoid extensive and costly structural damage.

4. Closed Valves

Several valves control water pressure. If any of them are partially closed, it can reduce the water pressure. Fortunately, this is usually an easy fix; simply open the valve more. However, if you need help locating the valve or determining which one it is, call a plumber for help.

If you’re experiencing a plumbing issue, such as low water pressure in your shower or bath, contact your local plumbing repair specialist for help. Ontario, NY, residents turn to John Lockwood Plumbing. This family-owned business has served the Wayne County community for over 40 years, providing a comprehensive range of services including plumbing repairs and installations. Call (585) 265-0736 to speak with a helpful team member or visit the website to learn more about their services.