Commercial kitchens are busy environments with multiple people working feverishly to put out the next order. They need to be safe, functional, efficient and designed with high-quality fixtures like custom-made stainless steel sinks and counters from a metal fabrication shop. Listed below are a few things to consider in the design process.

How to Design a Commercial Kitchen

1. Plan the Space

Before constructing the kitchen, consider how much space you’ll need and what goes where. Ergonomics is the primary consideration in designing kitchens to facilitate the efficient movement of staff and supplies, minimize time wastage and food spoilage, and reduce safety hazards.    

2. Designate Zones

Assign specific areas for cooking, baking, plating, releasing, and dishwashing to keep the workflow in the kitchen smooth and organized. Designated zones prevent overlapping of activities and reduce confusion when taking orders and preparing food. 

3. Leave Adequate Room for Movement

When planning, always have enough space in between areas for people to freely walk and move around while working. A cramped kitchen will have your staff struggling for room and bumping into each other, which can leave them flustered, tired, and stressed out during peak hours.

4. Install Safety Compliant Equipment

Ensure that your commercial kitchen adheres to local health and safety requirements when designing the space. Preparation areas must be at a certain distance away from waste and disposal drains to avoid contaminating the food. Have a metal fabrication shop install stainless steel sinks and counters tailored to your space for ease of maintenance, faster cleanups, and sanitary kitchen.

5. Ensure Good Ventilation

It’s not uncommon for things to heat up in the kitchen, and when it does, it can affect your staff as well. Make sure that your kitchen is well ventilated to keep smokes, fumes, and rising temperatures at bay during busy times. Doing so also helps maintain the dining area’s air clean and fresh.  

When you need custom-made stainless steel sinks and counters installed in your commercial kitchen, rely on C & C Machine to get it done. As the leading machine shop in La Crosse, WI, they’ve provided quality metal fabrication works and portable welding services throughout the area. Call (608) 784-4427 or visit their website to know more about metal fabrication and other services.