Share:

One of your most important responsibilities when you pump your own water off the grid is keeping it clean and free of harmful bacteria. If you keep up with water well maintenance, you don’t have much to worry about—but it’s wise to always expect the unexpected. So if your water ever appears discolored or tastes strange, the best thing to do is stop using it until you call Morgan Well & Pump Inc in Kannapolis, NC, for testing.

If they’ve determined your water has harmful bacteria, here’s what they’ll do next.

How Water Well Maintenance Pros Take Care of Contamination

1. Chlorine Water Treatment

If your water has been contaminated, your technician will first pour granulated chlorine down your well: approximately three ounces per 100 gallons. Then, they’ll allow the chlorine to circulate throughout.

2. Wait 24 Hours

water well maintenanceTo ensure your water is safe, you’ll need to allow at least 24 hours for the chlorine to kill off everything. Since you won’t be able to use your tap water during this time, you might want to stay with a friend or neighbor or perhaps rent a room for the night.

3. Follow-Up Water Testing

Once the 24-hour circulatory period is over, your water well maintenance technician needs to re-test the water. If enough bacteria has been killed, you can safely start using your well water again. If not, your specialist may recommend further chlorine treatment or suggest another course of action.

To stay on the safe side, plan to have your well tested at least once every two years, regardless of whether it appears contaminated—that way, you won’t have to guess about its cleanliness. To schedule a well inspection, call Morgan Well & Pump Inc at (704) 933-0479. More information about the family-owned water well maintenance company is available on their website. Their service area includes all of North Carolina.

tracking