While there are many benefits to using a well over municipal water, there is also more technology that you have to maintain to keep a steady supply of water running through your faucets. One very important part is the water well pump. According to Fertig Drilling Co. in Elko, NV, a well pump is necessary for routing the water into your home, so it’s essential that you know when it is no longer working correctly.

5 Indicators Your Well Pump Is Failing

1. Decreased Water Pressure

If you turn your water faucets on one day to discover the water is slowly dripping out, you could have a bad submersible pump. This problem can arise when the water pump is not running at full capacity. However, it is important to note that low pressure can also be caused by leaks in the pressure tank or water pipes.

2. Dirty Water

Although dirty water is not always a sign of pump failure, it warrants an inspection for signs of dirt infiltration. If dirt is allowed to get into your pump, it could damage its components and cause it to stop working prematurely. However, dirty water could also indicate that the water level has dropped too low or that the pump has been placed at the wrong depth.

3. Air in the System

If you notice the water sputtering or faltering whenever you turn on your faucet, you most likely have air in your water well pump. As long as this is not a frequent issue, it probably does not mean your pump is about to fail. However, if it starts to happen regularly, your pump could be on its last legs.

4. No Water Flow From Faucets

A bad submersible pump can sometimes stop water from flowing into your home completely. Although this problem can be caused by a simpler condition such as a clogged pipe or blown pump fuse, it might also be a far more serious problem such as a broken water pipe. Either way, you should contact a local residential water well contractor to help you quickly solve the problem.

5. Constantly Running Pump

When a water pump continuously runs, it could have a number of things wrong with it. For instance, the shutoff switch or water sensor may have failed, the tank could be waterlogged, or it might not be able to raise enough water from the well. If you can correct these problems early enough, you can keep your pump working. However, when left untreated, these issues can quickly wear the pump out.

To ensure your water well pump is able to last for many more years, contact Fertig Drilling Company about their pump repair and maintenance services today. For more information, call (775) 753-7960 or visit their website.