A pool pump keeps water in the pool clean and clear by pulling the water and running it through filters that block out dirt and other particles. Since pumps run continuously and the filtered particles eventually accumulate, regular maintenance is a must if you want to extend the lifespan of your pump

Midway Electric of Demorest, GA is a trusted electrical contractor that offers pool pump repair and maintenance to both residential and commercial clients. They also specialize in designing and installing water systems. They offer some tips on how to properly maintain your pool pump.

Top 9 Pool Pump Maintenance Tips

1. Remove Debris

Check the pump and its surrounding area for algae and dirt. Do not let debris build up around the motor vents as they may lead to clogs. Sweep and dust the area at least once a week, especially the vents.

2. Clean Strainer Basket

The strainer basket collects large pieces of debris to prevent clogging. It needs to be checked and cleared at least once a week. Refer to your pump manual and look for the location of your strainer basket.

3. Clean Filters

No matter what type of filter you’re using, periodic cleaning of the filters is necessary to maintain normal flow rate and keep the water clean. Do it at least once a month, or three to four times each year.

4. Check For Leaks

Leaks can occur at the pump piping connections. If not repaired immediately, this may lead to bearing or insulation failure. Have a pool professional conduct a thorough inspection and make the necessary repairs.

5. Check Pressure Gauge

Check your pump’s pressure gauge weekly. The correct pressure depends on the pool size and the pump’s horsepower. Refer to your owner’s manual for the guidelines on correct pressure level.

6. Dry Interiors

If the pool pump motor needs to be shut down for a long period, make sure to dry its interiors to prevent rust formation. Cover it to keep debris from building up but do not use airtight wrappings.

7. Shut Off Hot Pump

A pool pump that’s hot to the touch may be a sign of thermal overload. Shut it off immediately to avoid burnout. Check the basket and filter and make sure nothing is clogging them. If it doesn’t work, call a technician.

8. Listen Carefully

Electric motor pumps do give off a little noise but listen carefully. If the noise is louder than normal, something might be jammed inside the impeller. It may also indicate that some parts are worn out or cracked.

9. Lubricate O-Ring

The O-Ring on the pump lid should be well-lubricated. This makes the lid seal properly and easier to remove. Use only approved O-ring lubricants.

Whether you need pool pump repair, water treatment system, or electrical services, you can trust the experts of Midway Electric. Call (706) 754-6218 or visit their website for more information.