One good way to update your surroundings, add visual interest to a room, and increase the value of your home is to install interior crown moulding between your ceiling and walls. Huber Lumber, the premier building supplies company in Cincinnati, OH, describes crown moulding as plaster or wooden trim that adds a subtle design flare to homes. 

The Cincinnati lumber experts offer the following steps to help you DIY a crown moulding project:

• Assemble Materials: You will need crown moulding (MDF is less expensive than wood, but can warp in the humidity of a kitchen or bathroom), a hammer, nails, a caulk gun with paintable caulk, a miter saw, a coping saw, a ladder, and a tape measure.
• Cut Corners: Use a coping saw or power miter saw to cut corners at a 45-degree angle. This is the most difficult part of the project.
• Mark Walls: Use measuring tape to determine length of the first piece and mark the wall to indicate the bottom edge of the moulding.
• Cut The First Piece: Once you know the wall size, cut the first piece so the edges butt against opposing walls.
• Cut The Second Piece: Set the miter saw to 45 degrees and cut the inside corner piece, pressing firmly. To fit the inside corner, the top piece should be longer than the bottom.
• Cope The Joint: With the coping saw, scribe the end of one moulding so it fits snugly against the face of the other. Cut at a slight angle, moving slowly to avoid splintering.
• Use Corner Blocks: To avoid coping and mitering, you can instead use corner blocks, which look good and are much easier to use.
• Attach Moulding: Once the pieces fit, attach the moulding to the wall with a hammer and nails. Long pieces may require two people. Apply caulk where necessary to hide any gaps.
• Paint: Paint and caulk can cover any imperfections. If you use stained moulding, disguising mistakes is much more difficult.

Huber Lumber, the most trusted building supplies company in Cincinnati, OH, specializes in deck materials, kitchen cabinets, windows and doors, and quality lumber for all of your building and renovation projects. They are committed to quality, community-oriented, and are a fixture of Cincinnati's construction scene. Visit them online or call (513) 731-4035 for more information about Huber Lumber.