When your water service depends upon a private well and a water pump instead of a municipal utility hookup, it becomes your responsibility to resolve any equipment issues. Midway Electric, the premier electrical contractor in Demorest, GA, explains below some of the signs of a failing well pump. Since 1955, this local electrical contractor has fielded a team of experts who can diagnose and repair any problem you might encounter.

3 Important Signs Your Well Pump Is Failing

Low Water Pressure

If you turn on your faucet and the water dribbles out slowly, you may have a bad submersible pump. It’s possible, however, that the low pressure is a result from a bad pressure tank, which is an air-filled bladder in the well house that maintains constant water pressure. Leaks in the pipe or pressure tank can also cause low pressure.

No Water Flow

If there is no water flow from your faucets, you could have a problem with the submersible pump, similar to the one noted above. A lack of water flow could also indicate a clogged pipe, a blown pump house fuse, or even a broken water pipe. If you’ve looked into the problem and have ruled out simpler causes, consider contacting an electrical contractor for well pump service.  

Pump Runs Constantly

If your water pump runs almost constantly, it may be due to a variety of issues. The shutoff switch or water sensor may have failed, or it may be having problems raising water from the well. If the pump cycles on and off frequently, it may indicate a waterlogged tank. This is not a serious problem, but, if it is left untreated, the pump will eventually wear itself out.

Midway Electric, the premier electrical contractor in Demorest, GA, has been in business for more than 60 years. So you can be sure that they have the experience and expertise necessary to get your water pump working again no matter what the problem is. Visit their website for contact details, or call (706) 754-6218 with speak with a friendly specialist about your electrical service needs.