A pool pump keeps the water in your pool clean and clear by running it through filters that screen out dirt and other particles. Because pool pumps run continuously and the filtered particles eventually accumulate, regular maintenance is necessary if you want to extend the lifespan of your device and keep your water pristine.

Midway Electric of Demorest, GA, is a trusted electrical contractor that offers pool pump repairs and maintenance to both residential and commercial clients. Here, they offer some tips on how to properly maintain your pool pump.

Top 9 Pool Pump Maintenance Tips

Remove Debris

Check the pump and its surrounding area for algae and dirt. Do not let debris build up around the motor vents, as this may lead to clogs. Declutter the area at least once a week.

Clean The Strainer Basket

The strainer basket collects large pieces of debris to prevent clogging. It needs to be checked and cleared at least once per week. 

Clean The Filters

No matter what type of filter you’re using, periodic cleaning is necessary to maintain normal flow rate and keep the water clean. Do this at least once per month while your pool is open for use.

Check For Leaks

Leaks often occur at the points where pump pipes meet. If not repaired immediately, leaks can lead to bearing or insulation failure. Have a pool professional conduct a thorough inspection of your water treatment system and make any necessary repairs.

Check The Pressure Gauge

Check your pump’s pressure gauge weekly. The correct pressure depends on your pool’s size and the pump’s horsepower. Refer to your owner’s manual for the guidelines regarding correct pressure levels.

Dry Interiors

If the pool pump motor needs to be shut down for a long period, dry its interior to prevent rust formation. Cover this device to keep debris from building up, but do not use airtight wrappings.

Shut Off A Hot Pump

A pool pump that’s hot to the touch may be a sign of thermal overload. Shut it off immediately to avoid burnout. Check the basket and filter to ensure nothing is clogging them, but if there is no discernible issue, call a technician immediately.

Listen Carefully

Electric motor pumps do give off a little noise, but listen carefully. If the noise is louder than normal, something might be jammed inside the impeller. It may also indicate that some parts are worn-out or cracked.

Lubricate O-Ring

The O-ring on the pump lid should be well-lubricated. This makes the lid easier to remove and creates a proper seal. Use only approved O-ring lubricants to avoid more costly damages.

Whether you need pool pump repair, water treatment system, or electrical services, you can trust the expert electrical contractors at Midway Electric. Call (706) 754-6218 or visit their website for more information.